Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0: Sat Dec  8 18:14:15 PST 2012
    root@bhyve:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz (3066.33-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x20655  Family = 0x6  Model = 0x25  Stepping = 5
  Features=0x8fa3ab7f<FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,APIC,SEP,PGE,CMOV,PAT,PSE36,DTS,MMX,FXSR,SSE,SSE2,SS,PBE>
  Features2=0x809ae215<SSE3,DTES64,DS_CPL,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,HV>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 7516192768 (7168 MB)
avail memory = 5076496384 (4841 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <BHYVE  BVMADT  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 4 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-16 on motherboard
module_register_init: MOD_LOAD (vesa, 0xffffffff80c19390, 0) error 19
kbd0 at kbdmux0
hpt27xx: RocketRAID 27xx controller driver v1.0 (Dec  8 2012 18:12:58)
acpi0: <BHYVE BVXSDT> on motherboard
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.31.INTA
virtio_pci0: <VirtIO PCI Network adapter> port 0x2000-0x201f at device 1.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci0: host features: 0x18020 <Status,MrgRxBuf,MacAddress>
virtio_pci0: negotiated features: 0x18020 <Status,MrgRxBuf,MacAddress>
vtnet0: Ethernet address: 00:a0:98:15:da:c3
virtio_pci1: <VirtIO PCI Block adapter> port 0x2040-0x207f at device 2.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci1
virtio_pci1: host features: 0x10000004 <RingIndirect,MaxNumSegs>
virtio_pci1: negotiated features: 0x10000004 <RingIndirect,MaxNumSegs>
vtblk0: error getting device identifier: 5
vtblk0: 20480MB (41943040 512 byte sectors)
uart2: <16550 or compatible> port 0x3f8-0x3ff irq 4 at device 31.0 on pci0
uart2: console (9600,n,8,1)
ctl: CAM Target Layer loaded
Timecounters tick every 10.000 msec
hpt27xx: no controller detected.
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/vtbd0p1 [rw]...